ONYX Logo
ONYX AVR REMOTE
HARDWARE COMPATIBILITY MATRIX // 100% DIRECT LOCAL LAN

100+ Receivers Supported Out of the Box.

If your receiver connects to your home network via Wi-Fi or Ethernet and was manufactured between 2011 and today, ONYX connects seamlessly with 14 ms response time and zero cloud lag.

✓ Onkyo TX-RZ & TX-NR (2011–2026)
✓ Pioneer Elite VSX-LX & SC (2012–2026)
✓ Integra DRX, DRC & DTR Series
Onkyo TX-RZ Flagship Cinema Series

TX-RZ70, TX-RZ50, TX-RZ3400, TX-RZ3100, TX-RZ1100, TX-RZ920, TX-RZ840, TX-RZ830, TX-RZ820, TX-RZ810, TX-RZ800, TX-RZ740, TX-RZ730, TX-RZ720, TX-RZ710, TX-RZ630

Onkyo TX-NR Series Mainstream

TX-NR7100, TX-NR6100, TX-NR6050, TX-NR5100, TX-NR696, TX-NR686, TX-NR676, TX-NR656, TX-NR595, TX-NR585, TX-NR575, TX-NR555, TX-NR646, TX-NR545

Pioneer Elite & SC Reference

VSX-LX805, VSX-LX505, VSX-LX305, VSX-LX105, VSX-LX504, VSX-LX304, VSX-LX104, SC-LX904, SC-LX704, SC-LX901, SC-LX801, SC-LX701

Pioneer VSX Series Surround

VSX-935, VSX-835, VSX-535, VSX-934, VSX-834, VSX-534, VSX-933, VSX-833, VSX-932, VSX-832, VSX-1131, VSX-831

Integra DRX & DRC Custom Install

DRX-8.4, DRX-5.4, DRX-3.4, DRX-2.4, DRX-7.1, DRX-5.3, DRX-4.3, DRX-3.3, DRX-2.3, DRC-R1.3, DRC-R1.1, DTR-60.7, DTR-50.7, DTR-40.7

Hi-Fi Stereo & Legacy 2011–2015

Onkyo TX-8270, TX-8390, TX-8260, TX-SR393, TX-SR494, Pioneer SX-N30AE, plus legacy TX-NR609, NR818, NR5009, NR3030 via standard eISCP port 60128

100% Home Network Control: Any Onkyo, Integra, or Pioneer AVR with network capability connects directly over your home Wi-Fi or Ethernet. Zero cloud bridges, third-party accounts, or firmware modifications required.
Crucial Setup Step: Enable "Network Standby"

To power ON your receiver from cold standby using ONYX, ensure "Network Standby" (or "IP Control / Fast Boot") is turned ON in your receiver's Hardware Setup menu. This keeps the receiver listening on your home network while the amplifier is asleep.

BEST PRACTICES FOR YOUR SETUP

Optimizing Your Home Theater Network

Follow these quick recommendations for 14 ms response times and bulletproof connection stability.

Direct Local Wi-Fi Connection

ONYX communicates directly over your local Wi-Fi router to your receiver. Commands never bounce through third-party cloud servers or external data centers, ensuring instantaneous volume stepping.

Ethernet vs. 5GHz Wi-Fi

For zero dropped packets, connecting your receiver via an Ethernet cable to your router or mesh node is recommended. If using Wi-Fi, ensure your phone and receiver are connected to the same local subnet without AP isolation.

Multi-Zone Control Parity

All verified models support discrete Zone 2 and Zone 3 power switching, independent volume attenuation, and discrete source routing directly from the ONYX zone drawer or Bilateral Tablet Cockpit.

DON'T SEE YOUR RECEIVER?

Request official support for your make & model.

We are continuously adding and verifying hardware profiles across network-enabled AV receivers. Share your model details with our engineering desk, and we will verify protocol compatibility for your setup.

Request Model Support → Open Support Portal